2D Fabrication: Pain
This was a process. Christina and I wanted to make something Animal Crossing themed. We chose to make a Nook Phone and a phone stand for the free-standing criteria. The image above shows the sketch we made. I made the phone stand and screen image. Christina made the phone shape, back, and technology to make the phone more 3D.
The most challenging part of this assignment was converting the file into laser-printer-friendly Illustrator file. We had to convert an image in Illustrator, and make it into a vector/rastor-friendly document. I dragged the assets to a new document, making sure only the lines were selected. Christina painstakingly removed all the white bits of the image. This left us with a clean traced image.
The next challenge was getting it printed. It was incredibly busy at the media lab. Christina and I decided to use the computer there to do all the file related tasks. We sent copies of it to our emails, and we decided to print it another time.
It’s the next day and Christina and I are at the Thingspace bright and early. Per protocol, we printed a 100% cardboard prototype to make sure the design printed correctly, and that all the pieces fit together. The next challenge is to print the design using 3 different materials (acrylic, card stock, and wood).
Due to the sheer size of the prototype print, it took a very long time to print. We decided to keep the cardboard as the main medium. It didn’t print fully the first time, so we had to print it vector again. It took around 30 minutes to finish printing the whole thing.
I like the finalized product as is. The cardboard makes it very light to transport. We both think it looks rad. It’s a larger scaled-up model of a nook phone from Animal Crossing. The stand would make me used to hold a Switch or something like that.
So uh, moment of genius. We decided to print out the phone stand, enlarged, as a Switch stand. Mad dash to finish, can’t life. We wanted to make it larger and cooler for presentation. Working with Illustrator was the worst.







Comments
Post a Comment